Spindle Actuator: energy-efficient plug-and-play solution up to 100 kN
The new Spindle Actuator is a highly advanced electromechanical drive that is extremely eco-friendly and low-maintenance due to its fully sealed design. Additionally, it only requires a power cable for installation, making setup incredibly simple.
3 reasons why the Spindle Actuator is perfect for your project:
-
done
Can replace hydraulic and pneumatic systems 1:1
-
done
Only a power cable required for installation
-
done
Precise control even under high loads
Customers from all over the world trust our drives
Are you familiar with these problems?
Both pneumatic and hydraulic drives consume not only a lot of energy during operation but also especially at standstill.
Your drive requires frequent maintenance at regular intervals. This not only wastes valuable time but also leads to high costs over time, questioning profitability.
Hydraulic systems cause pollution, and precise control requires significant technical effort.
How to solve these problems with the Spindle Actuator
Energy-saving lifting movements
The Spindle Actuator significantly reduces energy consumption. During standstill, no additional energy is required. This not only saves operating costs but also reduces CO₂ emissions, making the system more sustainable.
Easy maintenance
Thanks to its protected design, the maintenance requirements of the spindle actuator are minimal. This saves time and costs. Additionally, the robust construction reduces the risk of unplanned failures, increasing operational reliability.
Eco-friendly and precise
No pollution and precise control without significant effort. Since it doesn’t require oil filling, there’s no risk of leaks like those that can occur in hydraulic systems. This not only reduces environmental impact but also lowers maintenance efforts.
Spindle Actuator: power, precision, and easy installation – just one cable needed
The Spindle Actuator is equipped with either a trapezoidal lead screw or a ball lead screw inside. The trapezoidal lead screw is characterized by its self-locking feature, providing added safety. This design allows for precise and reliable lifting movements. The actuator is fully sealed and designed for loads of up to 100 kN.
In an era where the trend is shifting from hydraulic to electromechanical drives, the Spindle Actuator offers an energy-efficient and low-maintenance alternative to conventional hydraulic systems. Additionally, it is a versatile system, where stroke lengths, stroke speeds, and mounting options can be fully customized to meet the specific requirements of your application.
Unbeatable Advantages of a Spindle Actuator by GROB
Easy installation
The Spindle Actuator only requires a power cable for connection, which greatly simplifies installation. This eliminates the need for complex hydraulic or pneumatic lines, and the system is ready for use quickly.
Suitable for outdoor use
The Spindle Actuator can be easily used outdoors even under the harshest conditions. Its fully sealed design makes it IP68 water-resistant, and it can also be used in hygiene and food processing areas.
Highest precision with high load capacity
Due to its design, the Spindle Actuator offers highly precise control while simultaneously bearing impressive loads of up to 100 kN, making it ideal for demanding applications with high loads.
Still not quite sure?
In comparison
Comparable drives
✖ Replacement is difficult
✖ Not suitable for outdoor use
✖ Polluting
Spindle Actuator by GROB
✓ Easy replacement with similar drives
✓ Water-resistant and therefore suitable for outdoor use
✓ Extremely eco-friendly
Success Stories: How GROB's Screw Jacks are transforming the industry
Offshore Wind Farms
Have you ever wondered how much the massive nacelle of an offshore wind turbine weighs? It's well over 200 tons, equivalent to the weight of 6 fully loaded semi-trailer trucks. You can easily imagine that such gigantic masses cannot be moved with conventional lifting equipment. A specialized solution is required here. Learn what that solution looks like here.
Screw Jacks and King Charles - What they have in common
Screw jacks in Australia: When the Anglo-Australian Telescope (AAT) was ceremoniously inaugurated by the then-Prince Charles on October 16, 1974, at the Siding Spring Observatory in Australia, GROB Antriebstechnik GmbH was still a small artisanal enterprise. At that time, no one foresaw the connection that would later emerge. Click below to learn how the connection with GROB came about.
More applications with Screw Jacks can be found here:
You can find us here
Eberhard-Layher-Straße 5-7
74889 Sinsheim-Steinsfurt
Interested in a product? Submit an inquiry now!
Give us a call:
Or send us an email:
Philipp Schmalzhaf, Vertriebsleiter